Routines |
Prev: 04535 | Up: Map | Next: 05009 |
Used by the routine at MAIN_ADD.
The main loop controls the 'editing mode', the execution of direct commands and the production of reports.
|
||||
MAIN_EXEC | 04770 | LD (IY+49),2 | The lower part of the screen is to be two lines in size (see DF-SZ). | |
04774 | CALL AUTO_LIST | Produce an automatic listing. | ||
This entry point is used by the routine at NEW.
|
||||
MAIN_1 | 04777 | CALL SET_MIN | All the areas from E-LINE onwards are given their minimum configurations. | |
MAIN_2 | 04780 | LD A,0 | Channel 'K' is opened before calling the EDITOR. | |
04782 | CALL CHAN_OPEN | |||
04785 | CALL EDITOR | The EDITOR is called to allow the user to build up a BASIC line. | ||
04788 | CALL LINE_SCAN | The current line is scanned for correct syntax. | ||
04791 | BIT 7,(IY+0) | Jump forward if the syntax is correct (ERR-NR is 255). | ||
04795 | JR NZ,MAIN_3 | |||
04797 | BIT 4,(IY+48) | Jump forward if other than channel 'K' is being used (bit 4 of FLAGS2 is set). | ||
04801 | JR Z,MAIN_4 | |||
04803 | LD HL,(23641) | Point to the start of the line with the error (E-LINE). | ||
04806 | CALL REMOVE_FP | Remove the floating-point forms from this line. | ||
04809 | LD (IY+0),255 | Reset ERR-NR and jump back to MAIN_2 leaving the listing unchanged. | ||
04813 | JR MAIN_2 | |||
The 'edit-line' has passed syntax and the three types of line that are possible have to be distinguished from each other.
|
||||
MAIN_3 | 04815 | LD HL,(23641) | Point to the start of the line (E-LINE). | |
04818 | LD (23645),HL | Set CH-ADD to the start also. | ||
04821 | CALL E_LINE_NO | Fetch any line number into BC. | ||
04824 | LD A,B | Is the line number a valid one? | ||
04825 | OR C | |||
04826 | JP NZ,MAIN_ADD | Jump if it is so, and add the new line to the existing program. | ||
04829 | RST 24 | Fetch the first character of the line and see if the line is 'carriage return only'. | ||
04830 | CP 13 | |||
04832 | JR Z,MAIN_EXEC | If it is then jump back. | ||
The 'edit-line' must start with a direct BASIC command so this line becomes the first line to be interpreted.
|
||||
04834 | BIT 0,(IY+48) | Clear the whole display unless the flag (bit 0 of FLAGS2) says it is unnecessary. | ||
04838 | CALL NZ,CL_ALL | |||
04841 | CALL CLS_LOWER | Clear the lower part anyway. | ||
04844 | LD A,25 | Set the appropriate value for the scroll counter (SCR-CT) by subtracting the second byte of S-POSN from 25). | ||
04846 | SUB (IY+79) | |||
04849 | LD (23692),A | |||
04852 | SET 7,(IY+1) | Signal 'line execution' (set bit 7 of FLAGS). | ||
04856 | LD (IY+0),255 | Ensure ERR-NR is correct. | ||
04860 | LD (IY+10),1 | Deal with the first statement in the line (set NSPPC to 1). | ||
04864 | CALL LINE_RUN | Now the line is interpreted. Note: the address MAIN_4 goes on to the machine stack and is addressed by ERR-SP. | ||
After the line has been interpreted and all the actions consequential to it have been completed a return is made to MAIN_4, so that a report can be made.
|
||||
MAIN_4 | 04867 | HALT | The maskable interrupt must be enabled. | |
04868 | RES 5,(IY+1) | Signal 'ready for a new key' (reset bit 5 of FLAGS). | ||
04872 | BIT 1,(IY+48) | Empty the printer buffer if it has been used (bit 1 of FLAGS2 set). | ||
04876 | CALL NZ,COPY_BUFF | |||
04879 | LD A,(23610) | Fetch the error number (ERR-NR) and increment it. | ||
04882 | INC A | |||
This entry point is used by the routine at REPORT_G.
|
||||
MAIN_G | 04883 | PUSH AF | Save the new value. | |
04884 | LD HL,0 | The system variables FLAGX, X-PTR-hi and DEFADD are all set to zero. | ||
04887 | LD (IY+55),H | |||
04890 | LD (IY+38),H | |||
04893 | LD (23563),HL | |||
04896 | LD HL,1 | Ensure that stream 0 points to channel 'K' (see STRMS). | ||
04899 | LD (23574),HL | |||
04902 | CALL SET_MIN | Clear all the work areas and the calculator stack. | ||
04905 | RES 5,(IY+55) | Signal 'editing mode' (reset bit 5 of FLAGX). | ||
04909 | CALL CLS_LOWER | Clear the lower screen. | ||
04912 | SET 5,(IY+2) | Signal 'the lower screen will require clearing' (set bit 5 of TV-FLAG). | ||
04916 | POP AF | Fetch the report value. | ||
04917 | LD B,A | Make a copy in B. | ||
04918 | CP 10 | Jump forward with report numbers '0 to 9'. | ||
04920 | JR C,MAIN_5 | |||
04922 | ADD A,7 | Add the ASCII letter offset value. | ||
MAIN_5 | 04924 | CALL OUT_CODE | Print the report code and follow it with a 'space'. | |
04927 | LD A," " | |||
04929 | RST 16 | |||
04930 | LD A,B | Fetch the report value (used to identify the required report message). | ||
04931 | LD DE,5009 | Print the message. | ||
04934 | CALL PO_MSG | |||
04937 | XOR A | Follow it by a 'comma' and a 'space'. | ||
04938 | LD DE,5430 | |||
04941 | CALL PO_MSG | |||
04944 | LD BC,(23621) | Now fetch the current line number (PPC) and print it as well. | ||
04948 | CALL OUT_NUM_1 | |||
04951 | LD A,":" | Follow it by a ':'. | ||
04953 | RST 16 | |||
04954 | LD C,(IY+13) | Fetch the current statement number (SUBPPC) into the BC register pair and print it. | ||
04957 | LD B,0 | |||
04959 | CALL OUT_NUM_1 | |||
04962 | CALL CLEAR_SP | Clear the editing area. | ||
04965 | LD A,(23610) | Fetch the error number (ERR-NR) again. | ||
04968 | INC A | Increment it as usual. | ||
04969 | JR Z,MAIN_9 | If the program was completed successfully there cannot be any 'CONTinuing' so jump. | ||
04971 | CP 9 | If the program halted with 'STOP statement' or 'BREAK into program' CONTinuing will be from the next statement; otherwise SUBPPC is unchanged. | ||
04973 | JR Z,MAIN_6 | |||
04975 | CP 21 | |||
04977 | JR NZ,MAIN_7 | |||
MAIN_6 | 04979 | INC (IY+13) | ||
MAIN_7 | 04982 | LD BC,3 | The system variables OLDPPC and OSPCC have now to be made to hold the CONTinuing line and statement numbers. | |
04985 | LD DE,23664 | |||
04988 | LD HL,23620 | The values used will be those in PPC and SUBPPC unless NSPPC indicates that the 'break' occurred before a 'jump' (i.e. after a GO TO statement etc.). | ||
04991 | BIT 7,(HL) | |||
04993 | JR Z,MAIN_8 | |||
04995 | ADD HL,BC | |||
MAIN_8 | 04996 | LDDR | ||
MAIN_9 | 04998 | LD (IY+10),255 | NSPPC is reset to indicate 'no jump'. | |
05002 | RES 3,(IY+1) | 'K mode' is selected (reset bit 3 of FLAGS). | ||
05006 | JP MAIN_2 | And finally the jump back is made but no program listing will appear until requested. |
Prev: 04535 | Up: Map | Next: 05009 |