SkoolKit 2.x changelog

2.5 (2012-02-22)

  • Added support for [MemoryMap:*] sections in ref files (for defining the properties of memory map pages); removed support for the [MapDetails] section accordingly

  • Added support for multiple style sheets per HTML disassembly (by separating file names with a semicolon in the StyleSheet parameter in the [Paths] section of the ref file)

  • Added support for multiple JavaScript files per HTML disassembly (by separating file names with a semicolon in the JavaScript parameter in the [Paths] section of the ref file)

2.4.1 (2012-01-30)

  • The @ignoreua directive can now be used on entry titles, entry descriptions, mid-block comments and block end comments in addition to instruction-level comments; the @ignoredua and @ignoremrcua directives are correspondingly deprecated

  • The #SPACE macro now supports the syntax #SPACE([num]), which can be useful to distinguish it from adjacent text where necessary

2.4 (2012-01-10)

  • Added the skool2sft.py command (for creating skool file templates)

  • Added support to skool2ctl.py for preserving some ASM directives in control files

  • Enhanced the #UDG and #UDGARRAY macros so that images can be rotated

  • Added the ability to separate paragraphs in a skool file by using a dot (.) on a line of its own; removed support for the redundant #P macro accordingly

2.3.1 (2011-11-15)

  • Added support to skool2html.py for multiple ref files per disassembly

  • Enhanced the #UDG and #UDGARRAY macros so that images can be flipped horizontally and vertically

  • Enhanced the #POKES macro so that multiple pokes may be specified

  • Added support for the #FACT and #POKE macros in ASM mode

  • When the link text of a #BUG, #FACT or #POKE macro is left blank, the title of the corresponding bug, trivia or poke entry is substituted

  • Fixed the parsing of link text in skool macros in ASM mode so that nested parentheses are handled correctly

  • Fixed the rendering of table borders in ASM mode where cells with rowspan > 1 in columns other than the first extend to the bottom row

2.3 (2011-10-31)

  • Fixed the bug where the operands in substitute instructions defined by @bfix, @ofix, @isub, @ssub and @rsub directives are not converted to decimal or hexadecimal when using the -D or -H option of skool2asm.py or skool2html.py

  • Removed the source files for the Skool Daze, Back to Skool and Contact Sam Cruise disassemblies from the SkoolKit distribution; they are now available as separate downloads

2.2.5 (2011-10-17)

  • Enhanced the #UDGARRAY macro so that masks can be specified

  • Added the -p option to bin2tap.py (to set the stack pointer)

  • Fixed the parsing of link text in #BUG, #FACT, #POKE and other skool macros so that nested parentheses are handled correctly

  • Fixed the handling of version 1 Z80 snapshots by sna2skool.py

  • Added support for the IndexPageId and Link parameters in [OtherCode:*] sections of the ref file

  • Reintroduced support for [Changelog:*] sections in ref files

  • Added ‘Changelog’ pages to the Skool Daze, Back to Skool and Contact Sam Cruise disassemblies

  • Updated the Contact Sam Cruise disassembly

2.2.4 (2011-08-10)

  • Added support for the @ignoredua ASM directive

  • skool2asm.py automatically decreases the width of the comment field for a ‘wide’ instruction instead of printing a warning

  • bin2tap.py can handle binary snapshot files with ORG addresses as low as 16398

  • Fixed the bug in bin2tap.py that prevents the START address from defaulting to the ORG address when the ORG address is specified with the -o option

  • Added ASM directives to csc.skool so that it works with skool2asm.py

  • Updated the Contact Sam Cruise disassembly

2.2.3 (2011-07-15)

Updated the Contact Sam Cruise disassembly; it is now ‘complete’.

2.2.2 (2011-06-02)

  • Added support for the @end ASM directive

  • Added ASM directives to {bts,csc,sd}-{load,save,start}.skool to make them work with skool2asm.py

  • skool2asm.py, skool2ctl.py and skool2html.py can read from standard input

  • Fixed the bug that made sna2skool.py generate a control file with a code block at 65535 for a snapshot that ends with a sequence of zeroes

  • Unit test test_skool2html.py:Skool2HtmlTest.test_html now works without an internet connection

2.2.1 (2011-05-24)

  • SkoolKit can now be installed as a Python package using setup.py install

  • Unit tests are included in the tests directory

  • Man pages for SkoolKit’s command scripts are included in the man directory

  • Added ‘Developer reference’ documentation

  • Fixed the bugs that made skool2html.py produce invalid XHTML

2.2 (2011-05-10)

  • Changed the syntax of the skool2html.py command (it no longer writes the Skool Daze and Back to Skool disassemblies by default)

  • Fixed the bug that prevented skool2asm.py from working with a zero-argument skool macro (such as #C) at the end of a sentence

  • Fixed the -w option of skool2asm.py (it really does suppress all warnings now)

  • Fixed how sna2skool.py handles #P macros (it now writes a newline before and after each one)

  • Fixed the bug that made sna2skool.py omit the ‘*’ control directive from routine entry points when the -L option was used

  • ASM labels are now unaffected by the -l (lower case) and -u (upper case) options of skool2asm.py

  • Added support for the ‘*’ notation in statement length lists in sub-block control directives (e.g. B 32768,239,16*14,15)

  • Updated the Skool Daze disassembly

  • Updated the Back to Skool disassembly

2.1.2 (2011-04-28)

  • Added the -L option to sna2skool.py (to write the disassembly in lower case)

  • Added the -i option to skool2html.py (to specify the image library to use)

  • In control files, DEFM, DEFW and DEFS statement lengths in T, W and Z sub-blocks may be declared

  • Fixed the bug in skool2asm.py’s handling of the #SPACE macro that prevented it from working with csc.skool

  • Fixed the bug that made skool2asm.py produce invalid output when run on sd.skool with the -H and -f3 options

2.1.1 (2011-04-16)

  • Added the -l, -u, -D and -H options to skool2html.py (to write the disassembly in lower case, upper case, decimal or hexadecimal)

  • Added the -u, -D and -H options to skool2asm.py (to write the disassembly in upper case, decimal or hexadecimal)

  • In control files, an instruction-level comment that spans a group of two or more sub-blocks of different types may be declared with an M directive

  • Updated the incomplete Contact Sam Cruise disassembly

2.1 (2011-04-03)

  • Added support for hexadecimal disassemblies

  • Added the #LINK macro (for creating hyperlinks to other pages in an HTML disassembly)

  • Added the ability to define custom pages in an HTML disassembly using [Page:*] and [PageContent:*] sections in the ref file

  • Added the -o option to skool2html.py (to overwrite existing image files)

  • Optional parameters in any position in a skool macro may be left blank

  • In control files, DEFB statement lengths in multi-line B sub-blocks may be declared

  • Updated the Skool Daze disassembly

  • Updated the Back to Skool disassembly

  • Updated the incomplete Contact Sam Cruise disassembly

2.0.6 (2011-03-09)

  • sna2skool.py can read and write hexadecimal numbers in a control file

  • skool2ctl.py can write hexadecimal numbers in a control file

  • sna2skool.py no longer chokes on blank lines in a control file

  • Updated the incomplete Contact Sam Cruise disassembly

2.0.5 (2011-02-09)

  • Added the #UDGARRAY macro (for creating images of blocks of UDGs)

  • Enhanced the #FONT macro so that it works with regular 8x8 fonts as well as the Skool game fonts

  • Enhanced the #SCR macro so that it can take screenshots of rectangular portions of the screen

  • The contents of the ‘Other graphics’ page of a disassembly are now defined in the [Graphics] section of the ref file

  • Added the ability to define the layout of the disassembly index page in the [Index] and [Index:*:*] sections of the ref file

  • Added the ability to define page titles in the [Titles] section of the ref file

  • Added the ability to define page link text in the [Links] section of the ref file

  • Added the ability to define the image colour palette in the [Colours] section of the ref file

  • Fixed the bug in sna2skool.py that prevented it from generating a control file for a snapshot with the final byte of a ‘RET’, ‘JR d’, or ‘JP nn’ instruction at 65535

  • Updated the incomplete Contact Sam Cruise disassembly

2.0.4 (2010-12-16)

Updated the incomplete Contact Sam Cruise disassembly.

2.0.3 (2010-12-08)

Updated the incomplete Contact Sam Cruise disassembly.

2.0.2 (2010-12-01)

  • Fixed the #EREFS, #REFS and #TAPS macros

  • Fixed the bug where the end comment for the last entry in a skool file is not parsed

  • Updated the incomplete Contact Sam Cruise disassembly

2.0.1 (2010-11-28)

  • Added the -r option to skool2html.py (for specifying a ref file)

  • Added the -o, -r, and -l options to sna2skool.py, along with the ability to read binary (raw memory) files

  • Fixed skool2ctl.py so that it correctly creates sub-blocks for commentless DEF{B,M,S,W} statements, and writes the length of a sub-block that is followed by a mid-routine comment

  • Updated the incomplete Contact Sam Cruise disassembly

2.0 (2010-11-23)

  • Updated the Back to Skool disassembly

  • Enhanced the #R macro to support ‘other code’ disassemblies, thus making the #ASM, #LOAD, #SAVE and #START macros obsolete

  • Split load.skool, save.skool and start.skool into separate files for each Skool game

  • Added documentation on the ref file sections

  • Simplified SkoolKit by removing all instances of and support for ref file macros and skool directives

  • Added files that were missing from SkoolKit 1.4: csc-load.skool, csc-save.skool and csc-start.skool